production of the FS series universal grinder parameters

  1, prior to use, check the machine all fasteners are tightened, the belt tensioner.

Direction of rotation of the spindle must comply with the direction of the arrow shown in Hood, otherwise it will damage the machine, and may result in personal injury.
3, check the electrical is complete.
4, check the machine crushed indoor or without metal and other hard debris, otherwise they will bash tool to affect the operation of the machine.
5, the material in the pre-crushing sure to check the purity does not allow hard metal debris mixed, avoid to damage the tool or cause accidents such as burning.
6, oil cup on the machine should be kept into the lubricating oil to ensure the normal operation of the machine.
7, stop stop feeding, if not continue to use, to clear the remnants machine.
8, regular inspection tool with the screen is damaged, if damaged, should be replaced immediately.
9, use the opportunity to experience a small vibration, be sure to cover the connection handle to tighten, to avoid the accident.